26601Industri Peralatan Iradiasi/Sinar X, Perlengkapan Dan Sejenisnya
Diperbarui terakhir · Bersumber dari OSS Indonesia
This group includes the manufacturing of radiation equipment and tubes (irradiation) based on the use of X-ray, Alpha, Beta, or Gamma radiation, whether used in health and industry, such as industrial equipment, milk and food irradiation equipment, medical diagnosis, medical therapy, research and science, measuring equipment (gauging), and drilling equipment (well logging). For example, X-ray, beta, gamma radiation equipment, and other rays. It also includes the manufacturing of X-ray tubes, control panels, screens and related equipment, as well as sterilization equipment using ultraviolet light.
Key facts for KBLI 26601
The essentials a foreign investor needs to know before reading the rest of this page.
100% foreign ownership permitted via PT PMA. KBLI 26601 is not on Indonesia's closed, conditional, SME-reserved or partnership-required schedules under Pres. Reg. 10/2021.
Default minimum paid-up capital: IDR 2.5 billion (~USD 160K) under BKPM Reg. 5/2025 (effective Oct 2025) — applies unless a sector regulator sets a higher figure for this activity. The often-cited IDR 10 billion is the total investment commitment per KBLI realised over time via quarterly LKPM reports, not required upfront.
High-risk activity — requires NIB + full Operating License (Izin) to operate commercially. NIB alone enables only the preparation stage; an Operating License must be obtained before invoicing or production starts.
Statutory licensing turnaround: 30 days once we submit the application — on top of the 2–3 weeks for PT PMA incorporation. We coordinate the full sequence end-to-end.
Issuing authority for PMA: Menteri/Kepala Badan — specific to foreign-owned entities under this KBLI.
Ongoing reporting: quarterly LKPM (Investment Activity Report) to BKPM plus 6 sector-specific obligations. We file these on your behalf as part of monthly compliance — you stay out of the OSS portal entirely.
- Risk level
- HighNIB + full Operating License
- Primary license
- NIB + full Operating License (Izin)NIB enables preparation only — additional permit needed to operate
- Setup timeline
- 30 DaysStatutory turnaround at OSS
- Issuing authority
- Minister / Agency HeadFor foreign-owned (PMA) entities
- Min. paid-up capital
- IDR 2.5 BBKPM default paid-up — sector rules may set a higher figure
Status investasi (lokal)
Regulasi BUPM (Bidang Usaha Penanaman Modal) Indonesia menempatkan kode ini dalam salah satu dari lima kategori. Untuk perusahaan dengan pemegang saham WNI, batasan investasi asing dan ketentuan khusus PMA tidak berlaku — aturan di bawah mencakup yang relevan untuk operator lokal.
Sepenuhnya terbuka untuk investasi lokal
KBLI 26601 tidak memiliki batasan investasi untuk perusahaan milik Indonesia. PT lokal dengan pemegang saham WNI 100% dapat beroperasi di kegiatan ini secara langsung. Persyaratan perizinan di bawah berlaku seragam tanpa memandang nasionalitas modal.
How we handle your KBLI 26601 setup
Emerhub is a corporate-services provider in Indonesia. We do the legal and regulatory legwork for foreign investors so you can focus on the business itself. Here's what the engagement looks like.
- 1
Confirm the optimal structure for your business
2–3 business daysWe confirm KBLI 26601 is the right primary code for your business, advise on secondary codes you may also need, and finalize the holding structure with you before any filing.
What we need from you- Founders' passport copies and proof of residence
- Intended share split and board composition
- 2
Incorporate your PT PMA
7–10 business daysWe draft the Articles of Association before a notary, register the entity with the Ministry of Law & Human Rights (Kemenkumham), and obtain the company's tax ID (NPWP). Under BKPM Reg. 5/2025, paid-up capital is IDR 2.5 billion (~USD 160K) — the cash actually deposited at incorporation. The IDR 10 billion+ figure many sources still cite is the total investment commitment per KBLI, realised over time via your LKPM reports.
What we need from you- Powers of attorney (we prepare; you sign and notarize)
- Director / commissioner appointment letters
- Initial capital deposit confirmation
- 3
We obtain your NIB
1–2 business daysWe file the OSS application with KBLI 26601 as your primary business activity, complete the risk-based assessment, and collect the NIB (Business Identification Number) for you — typically within hours of submission. You don't need to touch the OSS portal.
What we need from you- Office address (virtual office acceptable for many KBLIs; we can arrange one)
- 4
Secure your full Operating License (Izin)
30+ business daysNIB is issued for the preparation stage. Commercial operation requires a full Operating License (Izin) issued by the competent ministry after a substantive review of the operator's capability, facility, and compliance. Operating with NIB alone exposes the entity to penalties, blacklisting, and contract invalidation. We prepare the application bundle, liaise with the competent ministry, and chase issuance through to the certificate. Statutory turnaround: 30 business days — real-world timing typically runs longer when site inspections or additional clarifications are requested.
What we need from you- Technical documentation specific to your operation
- Appointment of a Penanggung Jawab Teknis (PJT — technical responsible person)
- 5
Hand-off to ongoing compliance
OngoingPost-launch we run your monthly tax filings, quarterly LKPM (Investment Activity Reports), annual general meeting (RUPS), and any sector-specific reporting. You get a single point of contact and a monthly compliance digest — no Indonesian-language paperwork on your desk.
Apa itu KBLI 26601?
Penjelasan sederhana tentang klasifikasi ini dan jenis usaha yang termasuk di dalamnya.
KBLI 26601 adalah kode Klasifikasi Baku Lapangan Usaha Indonesia 5-digit untuk industri peralatan iradiasi/sinar x, perlengkapan dan sejenisnya. Termasuk dalam kategori Manufacturing Industry di bawah subgolongan Radiation Equipment, Electromedical, and Electrotherapy Equipment Industry. (golongan pokok 26) dalam taksonomi resmi KBLI 2020 yang dikelola Badan Pusat Statistik (BPS).
Siapa yang membutuhkan KBLI 26601?
Setiap entitas, baik milik Indonesia maupun asing, yang berniat beroperasi di bidang industri peralatan iradiasi/sinar x, perlengkapan dan sejenisnya sebagai kegiatan usaha utama atau sekunder wajib memilih kode ini pada NIB (Nomor Induk Berusaha). Kode yang dipilih menentukan instrumen perizinan yang dibutuhkan, otoritas penerbit, dan kewajiban kepatuhan berkelanjutan.
Mengapa kode ini penting?
Pendekatan Berbasis Risiko OSS Indonesia menggunakan kode KBLI untuk menentukan tiga hal: (1) apakah investasi asing diizinkan dan dengan batas berapa, (2) instrumen perizinan berbasis risiko yang dibutuhkan, dan (3) otoritas yang menerbitkan setiap instrumen. Memilih kode yang salah dapat menunda atau membatalkan izin Anda.
Panduan khusus Industri Pengolahan
Konteks sektor yang berlaku untuk KBLI 26601 di luar proses OSS umum. Konfirmasi dengan kementerian terkait sebelum komitmen modal.
- ·Pelaporan data industri via SIINas setiap 6 bulan.
- ·Registrasi BPOM dibutuhkan untuk setiap pangan, obat, kosmetik, atau alat kesehatan yang diproduksi.
- ·Sertifikasi halal wajib untuk sebagian besar produk konsumsi.
Dalam KBLI 2025 mendatang
BPS Indonesia menerbitkan taksonomi KBLI 2025 baru pada awal 2025. OSS, BKPM, dan kementerian operasional belum mengadopsinya — KBLI 2020 tetap menjadi standar aktif untuk pendaftaran usaha. Berikut apa yang akan datang untuk kode spesifik ini.
Dilanjutkan ke KBLI 2025
KBLI 26601 mempertahankan nomor kode dan ruang lingkup yang sama dalam taksonomi baru. Deskripsi kegiatan, hierarki, dan tujuan penggunaan kode tetap dipertahankan.
- ·Lanjutkan menggunakan 26601 untuk pendaftaran saat ini di KBLI 2020.
- ·Ketika OSS mengadopsi KBLI 2025 (waktu belum diumumkan), tidak diperlukan migrasi untuk kode ini.
- ·Tingkat risiko, izin, dan rutinitas otoritas yang ditampilkan di atas tetap berlaku di kedua taksonomi.
Ketika OSS mengadopsi KBLI 2025, kami akan memigrasi entitas yang ada ke kode pengganti yang sesuai sebagai bagian dari layanan kepatuhan berkelanjutan — tidak diperlukan tindakan dari pihak Anda sekarang.
Bicara dengan spesialisTingkat risiko per skala usaha
Indonesia's OSS Risk-Based Approach assigns a separate risk level for each of the four business scales. The licensing instruments required (NIB, Standard Certificate, Operating License) are determined by the risk level. Foreign-owned entities (PT PMA) must register at the Large scale, so the rightmost column applies to most foreign investors.
Micro
Small
Medium
Large
PMA scaleWhat does each risk level require to operate? ›
Licensing requirements in detail
Specific permits, application requirements and ongoing obligations vary by business scale and the sub-activity within this KBLI. We file these on your behalf — this section is for transparency on what we'll be handling. Switch between scales below; by default we show Large (the PMA scale).
Dekomisioning Fasilitas Iradiator Kategori II Menggunakan Sumber Radioaktif
Persyaratan permohonan
2Dokumen dan kapabilitas yang harus dipenuhi pada saat pendaftaran
- 01Dokumen program dekomisioning yang diperbarui sesuai dengan kondisi terkini
- 02Dokumen sistem manajemen yang diperbarui sesuai dengan tahap dekomisioning
Kewajiban berkelanjutan
7Kewajiban kepatuhan dan pelaporan selama operasional
- 01Pelaku Usaha menghentikan kegiatannya secara tetap
- 02Melaksanakan kegiatan dekomisioning setelah PB dekomisioning diterbitkan
- 03Melakukan penanganan limbah radioaktif yang ditimbulkan dari pelaksanaan dekomisioning
- 04Melaksanakan sistem manajemen pada saat proses dekomisioning dilakukan
- 05Memberikan akses kepada BAPETEN untuk melakukan inspeksi pada saat proses dekomisioning
- 06Menindaklanjuti ketidaksesuaian hasil inspeksi sesuai jangka waktu yang disepakati
- 07Melaporkan hasil pelaksanaan dekomisioning kepada BAPETEN
Otoritas penerbit
Otoritas yang menerbitkan izin tergantung pada situasi Anda.
| Otoritas | Berlaku saat |
|---|---|
| Menteri/Kepala Badan | Seluruh |
| Menteri/Kepala Badan | PMA |
Auxiliary permits (PB UMKU)
This KBLI commonly carries 14 additional permits attached to specific operational activities. PB UMKU permits are issued separately from the main business license — apply only for the ones relevant to your operation.
- Approval Letter for Clinical Trial Implementationapproval-letter-for-clinical-trial-implementation
- Approval Letter for the Import of Medical Devices and In Vitro Diagnostic Medical Devices via the Special Access Scheme (SAS)approval-letter-for-the-import-of-medical-devices-
- Certificate of Good Manufacturing Practice (GMP) for Medical Devicescertificate-of-good-manufacturing-practice-gmp-for
- Certificate of Support for Export-Import - Certificate of Import for Raw Materials of Productscertificate-of-support-for-exportimport-certificat
- Certificate of Support for Export-Import - Export Notification Certificatecertificate-of-support-for-exportimport-export-not
- Certificate of Support for Export-Import - Free Sale Certificate for Domestic Productscertificate-of-support-for-exportimport-free-sale-
