KBLI 33119: Repair of Other Fabricated Metal Products…

KBLI 33119: Repair of Other Fabricated Metal Products… · Open to PMA

§ 01

Foreign investment rules

Indonesia's BUPM (Investment Business Fields) regulation places this code into one of five tracks. The track determines whether a foreign investor (PMA) can operate in this activity at all, and under what conditions.

Status · open

Fully open to foreign investment

KBLI 33119 is not on Indonesia's closed, conditional, SME-reserved or partnership-required schedules. A foreign investor may incorporate a PT PMA with up to 100% foreign ownership and operate in this activity directly.

This KBLI is not listed in any restricted, closed, SME-reserved or partnership-required schedule under Pres. Reg. 10/2021 (as amended). A 100% foreign-owned PT PMA may operate in this activity, subject to the licensing requirements shown below. BKPM's default minimum capital is IDR 2.5 billion paid-up with IDR 10 billion+ total investment commitment per KBLI realised over time, but sector regulators (OJK, ESDM, BPOM, Kominfo, etc.) can set higher minimums for specific activities — we confirm the actual figure before incorporation.

§ 02

How we handle your KBLI 33119 setup

Emerhub is a corporate-services provider in Indonesia. We do the legal and regulatory legwork for foreign investors so you can focus on the business itself. Here's what the engagement looks like.

1
Confirm the optimal structure for your business
2–3 business days
We confirm KBLI 33119 is the right primary code for your business, advise on secondary codes you may also need, and finalize the holding structure with you before any filing.
What we need from you
- Founders' passport copies and proof of residence
- Intended share split and board composition
2
Incorporate your PT PMA
7–10 business days
We draft the Articles of Association before a notary, register the entity with the Ministry of Law & Human Rights (Kemenkumham), and obtain the company's tax ID (NPWP). Under BKPM Reg. 5/2025, paid-up capital is IDR 2.5 billion (~USD 160K) — the cash actually deposited at incorporation. The IDR 10 billion+ figure many sources still cite is the total investment commitment per KBLI, realised over time via your LKPM reports.

Get an exact quote and timeline for KBLI 33119, scoped to your specific business plan.

Request a quote

§ 05

Licensing requirements in detail

Specific permits, application requirements and ongoing obligations vary by business scale and the sub-activity within this KBLI. We file these on your behalf — this section is for transparency on what we'll be handling. Switch between scales below; by default we show Large (the PMA scale).

What's required to operate

NIB

NIB is sufficient for both preparation and commercial operation. No additional licensing instrument is issued by OSS at this risk level.

Application requirements

Documents and capabilities you must demonstrate at registration

No specific application requirements at this scale.

Ongoing obligations

Compliance and reporting duties throughout operation

01Have proof of submission of mandatory validated Industrial Data every 6 (six) months in accordance with the laws and regulations in the industrial sector and
02Ensure the safety and security of equipment and the process of service delivery, in accordance with applicable laws and regulations.
03Have a Standard Operating Procedure (SOP) document for after-sales service provision.
04Possess a competency training certificate for service provider human resources.
05Possess a calibration certificate for equipment used for measurement.

Issuing authority

The authority that issues the license depends on your situation.

Authority	Applies when
Minister/Head of Agency	The industrial location is situated within a cross-border area between provinces.
Minister/Head of Agency	Foreign Investment
Governor	The industrial location is in the relevant province.

Speak to Emerhub

Get your KBLI 33119 setup handled end-to-end.

Emerhub is a corporate-services provider in Indonesia. We handle PT PMA incorporation, licensing, tax registration and monthly compliance — so you focus on operating the business.

Get a quote for KBLI 33119

§ 01

Foreign investment rules

Status · open

Fully open to foreign investment

§ 02

How we handle your KBLI 33119 setup

Emerhub is a corporate-services provider in Indonesia. We do the legal and regulatory legwork for foreign investors so you can focus on the business itself. Here's what the engagement looks like.

1
Confirm the optimal structure for your business
2–3 business days
We confirm KBLI 33119 is the right primary code for your business, advise on secondary codes you may also need, and finalize the holding structure with you before any filing.
What we need from you
- Founders' passport copies and proof of residence
- Intended share split and board composition
2
Incorporate your PT PMA
7–10 business days
We draft the Articles of Association before a notary, register the entity with the Ministry of Law & Human Rights (Kemenkumham), and obtain the company's tax ID (NPWP). Under BKPM Reg. 5/2025, paid-up capital is IDR 2.5 billion (~USD 160K) — the cash actually deposited at incorporation. The IDR 10 billion+ figure many sources still cite is the total investment commitment per KBLI, realised over time via your LKPM reports.

Get an exact quote and timeline for KBLI 33119, scoped to your specific business plan.

Request a quote

§ 05

Licensing requirements in detail

What's required to operate

NIB

NIB is sufficient for both preparation and commercial operation. No additional licensing instrument is issued by OSS at this risk level.

Application requirements

Documents and capabilities you must demonstrate at registration

No specific application requirements at this scale.

Ongoing obligations

Compliance and reporting duties throughout operation

01Have proof of submission of mandatory validated Industrial Data every 6 (six) months in accordance with the laws and regulations in the industrial sector and
02Ensure the safety and security of equipment and the process of service delivery, in accordance with applicable laws and regulations.
03Have a Standard Operating Procedure (SOP) document for after-sales service provision.
04Possess a competency training certificate for service provider human resources.
05Possess a calibration certificate for equipment used for measurement.

Issuing authority

The authority that issues the license depends on your situation.

Authority	Applies when
Minister/Head of Agency	The industrial location is situated within a cross-border area between provinces.
Minister/Head of Agency	Foreign Investment
Governor	The industrial location is in the relevant province.

Speak to Emerhub

Get your KBLI 33119 setup handled end-to-end.

Emerhub is a corporate-services provider in Indonesia. We handle PT PMA incorporation, licensing, tax registration and monthly compliance — so you focus on operating the business.

Get a quote for KBLI 33119

§ 08

Common questions about KBLI 33119

What is KBLI 33119?

KBLI 33119 (Reparasi Produk Logam Pabrikasi Lainnya) is the 5-digit Indonesian Standard Industrial Classification code for repair of other fabricated metal products. It sits within the Manufacturing Industry category in the official KBLI 2020 taxonomy maintained by Badan Pusat Statistik (BPS).

Can foreign investors operate under KBLI 33119?

Yes — KBLI 33119 is fully open to foreign investment. A PT PMA may operate with up to 100% foreign ownership, subject to BKPM Reg. 5/2025 capital requirements (IDR 2.5 billion paid-up + IDR 10 billion+ commitment per KBLI).

What is the risk level of KBLI 33119?

KBLI 33119's risk levels per business scale: Micro Low, Small Low, Medium Low, Large Low. Foreign-owned entities (PT PMA) must register at the Large scale.

What licenses does KBLI 33119 require?

NIB only at Large scale. KBLI 33119 is classified as Low risk in OSS RBA, so the Business Identification Number covers OSS-side operational licensing on its own.

What is the minimum capital for a PT PMA under KBLI 33119?

BKPM Reg. 5/2025 default applies: IDR 2.5 billion paid-up capital at incorporation + IDR 10 billion+ total investment commitment per KBLI registered, realized over time and reported quarterly via LKPM.

How long does it take to register a business under KBLI 33119?

PT PMA setup typically takes 4-8 weeks end-to-end: AHU registration, NIB via OSS, bank account opening. KBLI-specific licensing depends on the permit instrument required.

Is KBLI 33119 eligible for Indonesian tax incentives?

Not on the Tax Holiday or Tax Allowance priority lists. KBLI 33119 businesses pay the standard 22% PPh Badan; Super Tax Deduction (300% R&D / 200% vocational training) may still apply for qualifying expenses.

Which authority issues the KBLI 33119 license?

Authority depends on the investor profile. For PMA: Minister/Head of Agency. For domestic SME scale: typically Governor (for Provincial scope) or Regent/Mayor (Regency/City scope). Specific mapping is in §1 of this page.

What other permits beyond the NIB does KBLI 33119 need?

Beyond the NIB, no specific auxiliary permits (PB UMKU) are recorded for KBLI 33119. Sector-specific obligations may still apply — verify with the relevant ministry.

What KBLI codes are similar to 33119?

KBLIs in the same subgroup 3311: 33111 (Repair of Ready-Made Metal Products for Buildings, Tanks, Water Tanks, and Steam Generators); 33112 (Repair of Weapons and Ammunition Products). These are closely related activities — see the related-codes section below for full list.

What you’ll need to operate under KBLI 33119

Foreign investment rules

Fully open to foreign investment

How we handle your KBLI 33119 setup

Confirm the optimal structure for your business

Incorporate your PT PMA

Licensing requirements in detail

Application requirements

Ongoing obligations

Issuing authority

Related codes in Metal Fabrication Product Repair.

Get your KBLI 33119 setup handled end-to-end.

Yes — open to PMA up to 100%.

What's specific to this sector

KBLI 33119 at a glance

What you’ll need to operate under KBLI 33119

Foreign investment rules

Fully open to foreign investment

How we handle your KBLI 33119 setup

Confirm the optimal structure for your business

Incorporate your PT PMA

Licensing requirements in detail

Application requirements

Ongoing obligations

Issuing authority

Related codes in Metal Fabrication Product Repair.

Get your KBLI 33119 setup handled end-to-end.

We obtain your NIB

Confirm operational readiness

Hand-off to ongoing compliance

What is KBLI 33119?

Who needs KBLI 33119?

Why does the code matter?

Under the upcoming KBLI 2025

Carried forward into KBLI 2025

Risk level by business scale

Micro

Small

Medium

Large

Common questions about KBLI 33119

What is KBLI 33119?

Can foreign investors operate under KBLI 33119?

What is the risk level of KBLI 33119?

What licenses does KBLI 33119 require?

What is the minimum capital for a PT PMA under KBLI 33119?

How long does it take to register a business under KBLI 33119?

Is KBLI 33119 eligible for Indonesian tax incentives?

Which authority issues the KBLI 33119 license?

What other permits beyond the NIB does KBLI 33119 need?

What KBLI codes are similar to 33119?