KBLI 23124: Clinical Glass Laboratory Equipment Indus…

KBLI 23124: Clinical Glass Laboratory Equipment Indus… · Open to PMA

§ 01

Foreign investment rules

Indonesia's BUPM (Investment Business Fields) regulation places this code into one of five tracks. The track determines whether a foreign investor (PMA) can operate in this activity at all, and under what conditions.

Status · open

Fully open to foreign investment

KBLI 23124 is not on Indonesia's closed, conditional, SME-reserved or partnership-required schedules. A foreign investor may incorporate a PT PMA with up to 100% foreign ownership and operate in this activity directly.

This KBLI is not listed in any restricted, closed, SME-reserved or partnership-required schedule under Pres. Reg. 10/2021 (as amended). A 100% foreign-owned PT PMA may operate in this activity, subject to the licensing requirements shown below. BKPM's default minimum capital is IDR 2.5 billion paid-up with IDR 10 billion+ total investment commitment per KBLI realised over time, but sector regulators (OJK, ESDM, BPOM, Kominfo, etc.) can set higher minimums for specific activities — we confirm the actual figure before incorporation.

§ 02

How we handle your KBLI 23124 setup

Emerhub is a corporate-services provider in Indonesia. We do the legal and regulatory legwork for foreign investors so you can focus on the business itself. Here's what the engagement looks like.

1
Confirm the optimal structure for your business
2–3 business days
We confirm KBLI 23124 is the right primary code for your business, advise on secondary codes you may also need, and finalize the holding structure with you before any filing.
What we need from you
- Founders' passport copies and proof of residence
- Intended share split and board composition
2
Incorporate your PT PMA
7–10 business days
We draft the Articles of Association before a notary, register the entity with the Ministry of Law & Human Rights (Kemenkumham), and obtain the company's tax ID (NPWP). Under BKPM Reg. 5/2025, paid-up capital is IDR 2.5 billion (~USD 160K) — the cash actually deposited at incorporation. The IDR 10 billion+ figure many sources still cite is the total investment commitment per KBLI, realised over time via your LKPM reports.

Get an exact quote and timeline for KBLI 23124, scoped to your specific business plan.

Request a quote

§ 05

Licensing requirements in detail

Specific permits, application requirements and ongoing obligations vary by business scale and the sub-activity within this KBLI. We file these on your behalf — this section is for transparency on what we'll be handling. Switch between scales below; by default we show Large (the PMA scale).

What's required to operate

NIB

Preparation only — additional permit needed below

Operating License (Izin)

Important: NIB is issued for the preparation stage. Commercial operation requires a full Operating License (Izin) issued by the competent ministry after a substantive review of the operator's capability, facility, and compliance. Operating with NIB alone exposes the entity to penalties, blacklisting, and contract invalidation.

Processing time

7Days

Statutory turnaround

Application requirements

Documents and capabilities you must demonstrate at registration

01Have a document outlining the plan for the type, specifications, quantity, and source of raw materials, as well as the source and amount/volume of energy and water needed to carry out industrial business activities for 1 (one) production cycle or for a duration of 6 (six) months ahead.
02Have documents in the form of: a. Machine specifications and/or equipment list b. Photos of machines/equipment c. Sales/rental agreement that proves: 1) Control (ownership/rental) of machines to produce industrial glass material products and quality testing equipment 2) Compliance of installed production capacity with business data
03Have a human resources organizational structure document that includes at least: a. Company leadership b. Production and/or quality control department c. Marketing department
04Have a flowchart document for: a. Procurement, receipt, and storage of raw materials b. Production process c. Quality control process d. Packaging, storage, transportation, and distribution of production results
05Possess documentation in the form of photos proving the availability of occupational accident handling facilities and rest areas for workers.
06Have a facility layout planning document that proves the availability of: a. Dedicated production space b. Quality control space
07Have a work agreement document that proves the ownership of employees working as Technical Responsible Person (PJT) for Medical Devices.
08Have a Statement of Commitment to Comply with Good Manufacturing Practices (GMP) for Medical Devices.

Ongoing obligations

Compliance and reporting duties throughout operation

01Have proof of submission of mandatory validated Industrial Data every 6 (six) months in accordance with the laws and regulations in the industrial sector.
02Ensure the safety and security of equipment, processes, production results, storage, and transportation, in accordance with applicable laws and regulations.
03Have: a. A user manual for the produced goods (including maintenance and troubleshooting handling) b. A card/letter/electronic code for the warranty of malfunctioning produced goods that proves the minimum service commitment to customers.
04Possess periodic calibration documents for quality control equipment or periodic results from independent laboratory tests on the produced products.
05Have a document in the form of a disaster evacuation SOP, including the arrangement of workplace safety signs.
06Possess a Quality Management System certificate (ISO 9001).
07Have at least 1 (one) Technical Responsible Person who has a Good Manufacturing Practice (GMP) training certificate for Medical Devices.

Issuing authority

The authority that issues the license depends on your situation.

Authority	Applies when
Minister/Head of Agency	The industrial location is situated within a cross-border area between provinces.
Minister/Head of Agency	Foreign Investment
Governor	The industrial location is in the relevant province.

§ 05

Auxiliary permits (PB UMKU)

PB UMKU permits sit on top of the main NIB and Sertifikat Standar — each is issued by a different ministry, and only when a specific operational activity is performed. This KBLI carries 5 candidate permits across 1 regulator; most operations only need a handful. Emerhub maps your operation to the exact set, files them, and tracks renewals.

Health & Medical Devices

5 permits

Ministry of Health (Kemenkes / BPOM). Applies to manufacturing, importing, distributing, or operating medical devices, hospitals, clinics, diagnostic services, and pharmacies. Most device permits are class-based (Class A/B/C/D); facility permits attach to the specific site.

Speak to Emerhub

Get your KBLI 23124 setup handled end-to-end.

Emerhub is a corporate-services provider in Indonesia. We handle PT PMA incorporation, licensing, tax registration and monthly compliance — so you focus on operating the business.

Get a quote for KBLI 23124

§ 01

Foreign investment rules

Status · open

Fully open to foreign investment

§ 02

How we handle your KBLI 23124 setup

Emerhub is a corporate-services provider in Indonesia. We do the legal and regulatory legwork for foreign investors so you can focus on the business itself. Here's what the engagement looks like.

1
Confirm the optimal structure for your business
2–3 business days
We confirm KBLI 23124 is the right primary code for your business, advise on secondary codes you may also need, and finalize the holding structure with you before any filing.
What we need from you
- Founders' passport copies and proof of residence
- Intended share split and board composition
2
Incorporate your PT PMA
7–10 business days
We draft the Articles of Association before a notary, register the entity with the Ministry of Law & Human Rights (Kemenkumham), and obtain the company's tax ID (NPWP). Under BKPM Reg. 5/2025, paid-up capital is IDR 2.5 billion (~USD 160K) — the cash actually deposited at incorporation. The IDR 10 billion+ figure many sources still cite is the total investment commitment per KBLI, realised over time via your LKPM reports.

Get an exact quote and timeline for KBLI 23124, scoped to your specific business plan.

Request a quote

§ 05

Licensing requirements in detail

What's required to operate

NIB

Preparation only — additional permit needed below

Operating License (Izin)

Processing time

7Days

Statutory turnaround

Application requirements

Documents and capabilities you must demonstrate at registration

01Have a document outlining the plan for the type, specifications, quantity, and source of raw materials, as well as the source and amount/volume of energy and water needed to carry out industrial business activities for 1 (one) production cycle or for a duration of 6 (six) months ahead.
02Have documents in the form of: a. Machine specifications and/or equipment list b. Photos of machines/equipment c. Sales/rental agreement that proves: 1) Control (ownership/rental) of machines to produce industrial glass material products and quality testing equipment 2) Compliance of installed production capacity with business data
03Have a human resources organizational structure document that includes at least: a. Company leadership b. Production and/or quality control department c. Marketing department
04Have a flowchart document for: a. Procurement, receipt, and storage of raw materials b. Production process c. Quality control process d. Packaging, storage, transportation, and distribution of production results
05Possess documentation in the form of photos proving the availability of occupational accident handling facilities and rest areas for workers.
06Have a facility layout planning document that proves the availability of: a. Dedicated production space b. Quality control space
07Have a work agreement document that proves the ownership of employees working as Technical Responsible Person (PJT) for Medical Devices.
08Have a Statement of Commitment to Comply with Good Manufacturing Practices (GMP) for Medical Devices.

Ongoing obligations

Compliance and reporting duties throughout operation

01Have proof of submission of mandatory validated Industrial Data every 6 (six) months in accordance with the laws and regulations in the industrial sector.
02Ensure the safety and security of equipment, processes, production results, storage, and transportation, in accordance with applicable laws and regulations.
03Have: a. A user manual for the produced goods (including maintenance and troubleshooting handling) b. A card/letter/electronic code for the warranty of malfunctioning produced goods that proves the minimum service commitment to customers.
04Possess periodic calibration documents for quality control equipment or periodic results from independent laboratory tests on the produced products.
05Have a document in the form of a disaster evacuation SOP, including the arrangement of workplace safety signs.
06Possess a Quality Management System certificate (ISO 9001).
07Have at least 1 (one) Technical Responsible Person who has a Good Manufacturing Practice (GMP) training certificate for Medical Devices.

Issuing authority

The authority that issues the license depends on your situation.

Authority	Applies when
Minister/Head of Agency	The industrial location is situated within a cross-border area between provinces.
Minister/Head of Agency	Foreign Investment
Governor	The industrial location is in the relevant province.

§ 05

Auxiliary permits (PB UMKU)

Health & Medical Devices

5 permits

Speak to Emerhub

Get your KBLI 23124 setup handled end-to-end.

Emerhub is a corporate-services provider in Indonesia. We handle PT PMA incorporation, licensing, tax registration and monthly compliance — so you focus on operating the business.

Get a quote for KBLI 23124

§ 08

Common questions about KBLI 23124

What is KBLI 23124?

KBLI 23124 (Industri Alat Laboratorium Klinis dari Kaca) is the 5-digit Indonesian Standard Industrial Classification code for clinical glass laboratory equipment industry. It sits within the Manufacturing Industry category in the official KBLI 2020 taxonomy maintained by Badan Pusat Statistik (BPS).

Can foreign investors operate under KBLI 23124?

Yes — KBLI 23124 is fully open to foreign investment. A PT PMA may operate with up to 100% foreign ownership, subject to BKPM Reg. 5/2025 capital requirements (IDR 2.5 billion paid-up + IDR 10 billion+ commitment per KBLI).

What is the risk level of KBLI 23124?

KBLI 23124's risk levels per business scale: Micro High, Small High, Medium High, Large High. Foreign-owned entities (PT PMA) must register at the Large scale.

What licenses does KBLI 23124 require?

NIB + Operating Licence (Izin). KBLI 23124 is High risk at Large scale, so the Operating Licence requires substantive sector-regulator approval before the business can operate. Expect a multi-month review with technical submissions. 5 sector-specific PB UMKU permits also apply depending on the exact activity. See the requirements summary at the top of the page.

What is the minimum capital for a PT PMA under KBLI 23124?

BKPM Reg. 5/2025 default applies: IDR 2.5 billion paid-up capital at incorporation + IDR 10 billion+ total investment commitment per KBLI registered, realized over time and reported quarterly via LKPM.

How long does it take to register a business under KBLI 23124?

PT PMA setup typically takes 4-8 weeks: AHU registration (1-2 weeks), NIB issuance via OSS (immediate to 1 week), bank account opening (2-4 weeks). The licensing cycle for KBLI 23124 specifically takes 7 days at the Large business scale.

Is KBLI 23124 eligible for Indonesian tax incentives?

Not on the Tax Holiday or Tax Allowance priority lists. KBLI 23124 businesses pay the standard 22% PPh Badan; Super Tax Deduction (300% R&D / 200% vocational training) may still apply for qualifying expenses.

Which authority issues the KBLI 23124 license?

Authority depends on the investor profile. For PMA: Minister/Head of Agency. For domestic SME scale: typically Governor (for Provincial scope) or Regent/Mayor (Regency/City scope). Specific mapping is in §1 of this page.

What other permits beyond the NIB does KBLI 23124 need?

Beyond the NIB, KBLI 23124 carries 5 PB UMKU permits across 1 sector regulator: Health & Medical Devices (5). Most operations only need 2-4 of these — the relevant set depends on which specific activities you actually perform; Emerhub maps the right subset before filing.

What KBLI codes are similar to 23124?

KBLIs in the same subgroup 2312: 23121 (Household Glassware and Utensils Manufacturing); 23122 (Non-Clinical, Pharmaceutical, and Healthcare Glass Laboratory Equipment Manufacturing); 23123 (Glass Packaging Industry); 23129 (Other Glass Products Industry). These are closely related activities — see the related-codes section below for full list.

What you’ll need to operate under KBLI 23124

Foreign investment rules

Fully open to foreign investment

How we handle your KBLI 23124 setup

Confirm the optimal structure for your business

Incorporate your PT PMA

Licensing requirements in detail

Application requirements

Ongoing obligations

Issuing authority

Auxiliary permits (PB UMKU)

Related codes in This subcategory includes the industry of producing glass products.

Get your KBLI 23124 setup handled end-to-end.

Yes — open to PMA up to 100%.

What's specific to this sector

KBLI 23124 at a glance

What you’ll need to operate under KBLI 23124

Foreign investment rules

Fully open to foreign investment

How we handle your KBLI 23124 setup

Confirm the optimal structure for your business

Incorporate your PT PMA

Licensing requirements in detail

Application requirements

Ongoing obligations

Issuing authority

Auxiliary permits (PB UMKU)

Related codes in This subcategory includes the industry of producing glass products.

Get your KBLI 23124 setup handled end-to-end.

We obtain your NIB

Secure your full Operating License (Izin)

Hand-off to ongoing compliance

What is KBLI 23124?

Who needs KBLI 23124?

Why does the code matter?

Under the upcoming KBLI 2025

Reorganised in KBLI 2025

Risk level by business scale

Micro

Small

Medium

Large

Common questions about KBLI 23124

What is KBLI 23124?

Can foreign investors operate under KBLI 23124?

What is the risk level of KBLI 23124?

What licenses does KBLI 23124 require?

What is the minimum capital for a PT PMA under KBLI 23124?

How long does it take to register a business under KBLI 23124?

Is KBLI 23124 eligible for Indonesian tax incentives?

Which authority issues the KBLI 23124 license?

What other permits beyond the NIB does KBLI 23124 need?

What KBLI codes are similar to 23124?