13134Batik Industry
Industri Batik
Last updated · Sourced from OSS Indonesia
This group includes batik businesses using the night (wax) process, whether done by writing, stamping, or a combination of stamping and writing.
Key facts for KBLI 13134
The essentials a foreign investor needs to know before reading the rest of this page.
100% foreign ownership permitted at class level — with sub-activity carve-outs KBLI 13134 is open to PT PMA, but Pres. Reg. 10/2021 carves out 2 specific sub-activities that are restricted, capped, or reserved for Indonesian capital. For example, "Batik industry: Stamp batik industry" is restricted. Scope your business plan to the open portion before incorporation.
Default minimum paid-up capital: IDR 2.5 billion (~USD 160K) under BKPM Reg. 5/2025 (effective Oct 2025) — applies unless a sector regulator sets a higher figure for this activity. The often-cited IDR 10 billion is the total investment commitment per KBLI realised over time via quarterly LKPM reports, not required upfront.
Medium-high-risk activity — requires NIB + Standard Certificate (Verified) to operate commercially. NIB alone enables only the preparation stage; a Standard Certificate must be obtained before invoicing or production starts.
Statutory licensing turnaround: 7 days once we submit the application — on top of the 2–3 weeks for PT PMA incorporation. We coordinate the full sequence end-to-end.
Issuing authority for PMA: Minister/Head of Agency — this KBLI is routed centrally rather than to provincial / regency level.
Ongoing reporting: quarterly LKPM (Investment Activity Report) to BKPM plus 6 sector-specific obligations. We file these on your behalf as part of monthly compliance — you stay out of the OSS portal entirely.
- Risk level
- Medium-HighNIB + verified cert.
- Primary license
- NIB + Standard Certificate (Verified)NIB enables preparation only — additional permit needed to operate
- Setup timeline
- 7 DaysStatutory turnaround at OSS
- Issuing authority
- Minister / Agency HeadDefault issuing authority
- Min. paid-up capital
- IDR 2.5 BBKPM default paid-up — sector rules may set a higher figure
Foreign investment rules
Indonesia's BUPM (Investment Business Fields) regulation places this code into one of five tracks. The track determines whether a foreign investor (PMA) can operate in this activity at all, and under what conditions.
Open to foreign investment, with carve-outs
KBLI 13134 is open as a class — a 100% foreign-owned PT PMA can be incorporated under this code — but Pres. Reg. 10/2021 carves out 2 specific sub-activities that are off-limits or restricted for foreign capital. The rest of the activity remains open to PMA. The carved-out items are listed below; any of them needs to be either avoided, served via an Indonesian operator, or structured around case-by-case.
Conditional sub-activities
1- Batik industry: Stamp batik industryDomestic only100% Domestic capital
Reserved for SMEs / cooperatives
1- Batik industry: Hand-drawn batik industry Combination hand-drawn and stamped batik industryAllocated for Cooperatives and UMKM.Sector: Industry
How we handle your KBLI 13134 setup
Emerhub is a corporate-services provider in Indonesia. We do the legal and regulatory legwork for foreign investors so you can focus on the business itself. Here's what the engagement looks like.
- 1
Confirm the optimal structure for your business
2–3 business daysWe confirm KBLI 13134 is the right primary code for your business, advise on secondary codes you may also need, and finalize the holding structure with you before any filing.
What we need from you- Founders' passport copies and proof of residence
- Intended share split and board composition
- 2
Incorporate your PT PMA
7–10 business daysWe draft the Articles of Association before a notary, register the entity with the Ministry of Law & Human Rights (Kemenkumham), and obtain the company's tax ID (NPWP). Under BKPM Reg. 5/2025, paid-up capital is IDR 2.5 billion (~USD 160K) — the cash actually deposited at incorporation. The IDR 10 billion+ figure many sources still cite is the total investment commitment per KBLI, realised over time via your LKPM reports.
What we need from you- Powers of attorney (we prepare; you sign and notarize)
- Director / commissioner appointment letters
- Initial capital deposit confirmation
- 3
We obtain your NIB
1–2 business daysWe file the OSS application with KBLI 13134 as your primary business activity, complete the risk-based assessment, and collect the NIB (Business Identification Number) for you — typically within hours of submission. You don't need to touch the OSS portal.
What we need from you- Office address (virtual office acceptable for many KBLIs; we can arrange one)
- 4
Secure your Standard Certificate (Verified)
7+ business daysNIB is issued for the preparation stage. To begin commercial operations, the operator must obtain a Sertifikat Standar that has been verified by the competent ministry. The verification step typically requires a site or document inspection. Operating with NIB alone is not legally compliant. We prepare the application bundle, liaise with the competent ministry, and chase issuance through to the certificate. Statutory turnaround: 7 business days — real-world timing typically runs longer when site inspections or additional clarifications are requested.
What we need from you- Technical documentation specific to your operation
- Appointment of a Penanggung Jawab Teknis (PJT — technical responsible person)
- 5
Hand-off to ongoing compliance
OngoingPost-launch we run your monthly tax filings, quarterly LKPM (Investment Activity Reports), annual general meeting (RUPS), and any sector-specific reporting. You get a single point of contact and a monthly compliance digest — no Indonesian-language paperwork on your desk.
What is KBLI 13134?
A plain-English explanation of this classification and the businesses it covers.
KBLI 13134 (Industri Batik) is the 5-digit Indonesian Standard Industrial Classification code for batik industry. It sits within Manufacturing Industry under the subgroup The Textile Finishing Industry (major group 13) in the official KBLI 2020 taxonomy maintained by Statistics Indonesia (BPS).
Who needs KBLI 13134?
Any Indonesian or foreign-owned entity that intends to operate in batik industry as a primary or secondary business activity must select this code on its NIB (Business Identification Number). The selected code determines the licensing instruments required, the issuing authority, and the ongoing compliance obligations.
Why does the code matter?
Indonesia's OSS Risk-Based Approach uses the KBLI code to determine three things: (1) whether foreign investment is permitted and at what cap, (2) the risk-based licensing instruments required, and (3) the authority that issues each instrument. Choosing the wrong code can delay or invalidate your license.
Manufacturing-specific guidance
Sector context that applies to KBLI 13134 beyond the generic OSS process. Verify with the relevant ministry before committing capital.
- ·Industry data reporting via SIINas every 6 months.
- ·BPOM registration required for any food, drug, cosmetic, or medical device produced.
- ·Halal certification mandatory for most consumable products.
Under the upcoming KBLI 2025
Indonesia's BPS published the new KBLI 2025 taxonomy in early 2025. OSS, BKPM and the operating ministries have not yet adopted it — KBLI 2020 remains the active standard for business registration. This is what's coming for this specific code.
Reorganised in KBLI 2025
KBLI 13134 does not carry the same number forward into KBLI 2025 — the activity has been reclassified, but the precise mapping isn't recorded in our database yet.
- ·For current operations, KBLI 13134 remains valid — OSS still uses KBLI 2020 for all business registrations.
- ·The KBLI 2025 successor codes are listed in the official BPS transition document below; check for the activity-specific mapping when planning future structures.
- ·Once OSS announces the KBLI 2025 cutover, existing entities will need to update their primary KBLI to the relevant successor — typically straightforward.
When OSS adopts KBLI 2025, we'll migrate your existing entity to the appropriate successor code as part of ongoing compliance — no action needed on your end now.
Talk to a specialistRisk level by business scale
Indonesia's OSS Risk-Based Approach assigns a separate risk level for each of the four business scales. The licensing instruments required (NIB, Standard Certificate, Operating License) are determined by the risk level. Foreign-owned entities (PT PMA) must register at the Large scale, so the rightmost column applies to most foreign investors.
Micro
Small
Medium
Large
PMA scaleWhat does each risk level require to operate? ›
Licensing requirements in detail
Specific permits, application requirements and ongoing obligations vary by business scale and the sub-activity within this KBLI. We file these on your behalf — this section is for transparency on what we'll be handling. Switch between scales below; by default we show Large (the PMA scale).
Application requirements
6Documents and capabilities you must demonstrate at registration
- 01Have a document outlining the plan for the type, specifications, quantity, and source of raw materials, as well as the source and amount/volume of energy and water needed to carry out industrial business activities for 1 (one) production cycle or for a duration of 6 (six) months ahead.
- 02Possess documents in the form of: a. Machine specifications and/or equipment list b. Photos of machines/equipment c. Sales/rental agreement that proves: 1) Control (ownership/rental) of machines to produce upstream textile products and quality testing equipment 2) Compliance of installed production capacity with business data
- 03Have a human resources organizational structure document that includes at least: a. Company leadership b. Person in charge of production and/or quality control c. Person in charge of marketing d. Person in charge of finance e. Person in charge of human resources development
- 04Have a flowchart document for: a. Procurement, receipt, and storage of raw materials b. Production process c. Quality control process d. Packaging, storage, transportation, and distribution of production results
- 05Possess documentation in the form of photos proving the availability of occupational accident handling facilities and rest areas for workers.
- 06Have a facility layout planning document for the plant in accordance with the process flow chart.
Ongoing obligations
7Compliance and reporting duties throughout operation
- 01Have proof of submission of mandatory validated Industrial Data every 6 (six) months in accordance with the laws and regulations in the industrial sector.
- 02Ensure the safety and security of equipment, processes, production results, storage, and transportation, in accordance with applicable laws and regulations.
- 03Inclusion of specifications, composition of materials, and/or care labels on products or packaging that demonstrate the implementation of minimum service to customers.
- 04Possess periodic calibration documents for quality control equipment or periodic results from independent laboratory tests on the produced products.
- 05Have a document in the form of a disaster evacuation SOP, including the arrangement of workplace safety signs.
- 06Possess a Quality Management System Certificate (ISO 9001)
- 07Have a safety and security SOP for: a. Storage of raw materials in the form of chemicals b. Use of machines/equipment c. Production processes
Issuing authority
The authority that issues the license depends on your situation.
| Authority | Applies when |
|---|---|
| Minister/Head of Agency | The industrial location is situated within a cross-border area between provinces. |
| Minister/Head of Agency | Foreign Investment |
| Governor | The industrial location is in the relevant province. |
Basic requirements (KKPR)
Class-level prerequisites that apply to every operator under this KBLI, independent of business scale. These commonly include minimum capital rules for PMA entities and spatial-planning (KKPR) conformance.
- 01The Batik Stamp Industry Business Sector is open to foreign capital of a maximum of 100% for investors from ASEAN with the obligation to partner with Cooperatives and Micro, Small and Medium Enterprises (MSMEs), based on International Agreements.
- 02
Batik Industry Business Sector:
- Written Batik Industry, and
- Batik Combination Writing and Stamp Industry
Allocated for Cooperatives and Micro, Small, and Medium Enterprises (MSMEs), as regulated in Presidential Regulation no. 49 of 2021 concerning Amendments to Presidential Regulation No. 10 of 2021 concerning the Investment Business Sector.
- 03The Batik Stamp Industry Business Sector, is only open to 100% domestic capital, as regulated in Presidential Regulation no. 49 of 2021 concerning Amendments to Presidential Regulation No. 10 of 2021 concerning the Investment Business Sector.
